2026-03-27 · 9 min read
Ultimate Guide to Stainless Steel Etching: Photochemical vs Silk-Screen Etching — Which Should You Choose?
For premium elevator cabins and large wall murals (such as a metal “Along the River During the Qingming Festival”), stainless steel etching creates striking three-dimensional patterns. Yet many teams struggle to choose between photochemical and silk-screen etching when weighing precision, tooling cost, and depth. This article explains how each process works, how to avoid jagged seams on large panels, and how to control tooling spend.
Read full guide2026-03-27 · 8 min read
The Secret of Stainless Steel Color Finishing: PVD Vacuum Plating vs Nano Color Oil — What Is the Real Difference?
“Why does antique bronze stainless look and cost so different?” PVD vacuum plating and nano color oil are often confused. This article breaks down physics, color expression, weathering, and bending pain points so procurement and designers can choose the safest anti-fade, anti-color-shift path for indoor/outdoor and formed parts.
Read full guide2026-03-27 · 9 min read
Ultimate Thickness Guide for Decorative Stainless Sheets: Ceilings, Walls, and Skirting — How Thick Should You Go?
Thickness is easy to overlook yet often drives failures: waviness, machine damage, honeycomb telegraphing. This guide summarizes recommended gauges for ceilings, walls, door frames, and skirting, explains why ultra-thin stock is risky to process, and gives practical weight and sizing formulas for cost control.
Read full guide2026-03-27 · 10 min read
Do Not Get Fooled: Four Practical Ways to Tell 304 from 201 Stainless Steel
201 and 304 look alike but differ sharply in corrosion resistance (nickel) and price. Using 201 in wet sites rusts fast. Here are four practical checks — spark, test solution, and spectrometer — plus where 201 must never go.
Read full guide2026-03-27 · 9 min read
Fighting Edge Cracking and Whitening: A Damage-Prevention Guide for Colored Stainless Fabrication and Installation
“One bend and the paint blows white” is a nightmare for cladding crews and shops. This guide targets edge cracking and whitening — stress, thickness, and V-groove depth — for nano color oil, antique copper, and water-ripple sheets so you stop paying for scrap.
Read full guide